Produse pentru ecoflux pro (11)

iglidur® J2 Environmentally friendly. The growing demand for PFOA-free iglidur® materials* is met by igus® with an ongoing review of all iglidur® materials – the list of already PFOA-free iglidur® materials is thus getting continuously longer – and a new iglidur® material: iglidur® J2. iglidur® J2 is available as cylindrical bearings and plain bearings with flange. Good mechanical properties, robust Low-priced Good resistance to media Lubricant- and mainteance-free

Composition: Propriotory blend of surfactants Emulcore® EC 50 it is a blend of anionic & nonionic surfactants which is the recommended emulsifier for EC formulations. Provides a stable emulsion with technical particles and non-polar solvents Emulcore® EC 50 is O/W emulsifier used in various formulation, technical & solvents Emulcore® EC 50 is oil adjuvant emulsifier When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take the necessary steps to ensure safety of use. Up to one years from the date of manufacture for material in original unopened, properly stored containers. Appearance:Yellow to amber colour liquid Solubility:Dispersible in water pH of (5% soln.):5,5 – 7,5 Moisture content (%):Maximum 1,0 %

Der Exovation 2SN Hydraulikschlauch ist ein mittlerer Hochdruckschlauch, der für den Einsatz mit Mineralölen, Wasser, Ölen auf Polyglykol- und Synthetik-Esterbasis, Wasser-Öl-Emulsionen und Rapsöl optimiert wurde. Er bietet eine beeindruckende Ozonbeständigkeit von 150 Stunden und eine Abriebfestigkeit von 0,5 g, was seine Langlebigkeit und Zuverlässigkeit unterstreicht. Seine robuste Konstruktion sorgt für eine lange Lebensdauer und minimiert das Risiko von Ausfällen. Mit einer Betriebstemperatur von -40°C bis +100°C ist der Exovation 2SN Hydraulikschlauch für eine Vielzahl von Anwendungen geeignet. Er ist besonders widerstandsfähig gegen chemische Einflüsse und bietet eine hohe Flexibilität, was ihn zu einer ausgezeichneten Wahl für moderne Hydrauliksysteme macht. Seine Fähigkeit, hohen Drücken standzuhalten, macht ihn zu einem unverzichtbaren Bestandteil jeder industriellen Ausrüstung.

Bond Plus Adhesive latex based on elastomeric styrene-butadiene rubber and alkaline silicate in aqueous dispersion, flexibilising, reactive, for adhesive grout and to improve adhesion, the behaviour and performance of mortars and plasters. Production of adhesive, deformable, high-protective and waterproofing performance mortars and plasters for civil, hydraulic, industrial works, in urban, marine and mountain atmospheres. Preparation of hydrating solutions to improve the adhesion and performance of premixed mortars and plasters; preparation of adhesive grouts for non-structural construction joints. Anti-dust treatments, reinforcing concrete surfaces. Shake Bond Plus thoroughly in the tank, and dilute it with water as required. Add the prepared solution to the cement (or lime) and aggregates mixture, in the most suitable dosages for this application, as specified below. It is always essential to carry out preliminary tests for an accurate definition of the mixtures to use, and to check the suitability of the product on the basis of the specific requirements. Refer to the table shown in the product datasheet. Packaging: 25 kg can UM: €/kg

Enrobage des semences réduisant les pertes liées aux insectes et aux nuisibles du sol Destiné à l’enrobage des semences pour assurer des levées saines, vigoureuses et homogènes EVAFILM 200 a une action naturelles et réalisant une barrière naturelle . EVAFILM 200 est une gamme de produits à base d’extraits de plantes et d’huiles essentielles. – Huiles végétales – Extrait de plantes – Huiles essentielles Il est normé en Norme NFU Il s’utilise en agriculture biologique selon les réglements CE 834/2007 et 889/2008

Spécifique pour les produits difficiles à démouler, par exemple riches en sucre et en protéine. Excellent pouvoir anti-adhérent. Viscosité :700 à 1100 mPa.s (25°C) Valeur d’iode:± 80 Point de fumée:230 °C POIDS SPECIFIQUE:920 kg/m3 (20°C) Formats disponibles:10L – GRV 1000L

Ce produit contient : 50 protections en polystyrène par paquet 50 carton de suremballage par paquet UGS:Euro-04

Maxant® PRO is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Permanent foam cut off Stable effects during storage period Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Maxant® PRO is mainly designed for preventing foam in process applications. For process applications, we recommend prediluting Maxant® PRO silicone antifoam with cold water in a ratio of 1:1 to 1:10. Appearance Visual:Milky white liquid Solid Content (%) HE73 / 01, Mettler Toledo, 160°C.:20-25% pH at 25°C pH 7110, Inolab:7-8 Ionic character:Nonionic Viscosity at 25°C LVDV-E 230, Brookfield:1000-1500 CP

SURFECO® PLUS is a super-spreading surfactant based on a trisiloxane ethoxylate, a silicone polyether copolymer with 550 molecular weight. SURFECO® PLUS has super-spreading properties in aqueous solutions while remaining stable in formulations from pH 5 - 8. SURFECO® PLUS can reduce surface tension in aqueous solutions at use levels up to 1.0 % by weight. Typical recommended starting level is 0.1 %. Stable effects during storage period Super-spreading and wetting Lowers surface tension more, compared to conventional surfactants Provides an aqueous surface tension of 21.5 nM/m2 Effective and remaining stable in formulations from pH 5 - 8 Low viscosity Very effective at low concentrations SURFECO® PLUS should be added directly into tank and agitated to ensure proper mixing. For optimum performance, solutions containing SURFECO® PLUS should be applied within 72 hours after mixing. Surface Tension (0.1%):(0.1%)21,5 nM/m2 Viscosity at 25 0C:500-900 mPa.s Cloud Point:< 10 °C Base Fluid Viscosity:20 – 30 Ionic Character:Nonionic

Ce produit contient : 5 protections en polystyrène par paquet 5 carton de suremballage par paquet UGS:Euro-JERO

Ce produit contient : 30 protections en polystyrène par paquet 30 carton de suremballage par paquet UGS:Euro-03